Does having a ring resized mean getting an entirely new ring?

Question

The jewelry store where I got my ring covers resizing if necessary, but when I went in to have them do it (the ring was literally sliding off my finger) they kept trying to discourage me from doing it, saying that if I did, the ring I got back would not be the same one I had now, because that’s how resizing was done. It meant an entirely new ring. I’ve since researched a bit and I’m starting to question that story.

Can anyone tell me how a ring is resized when it’s too big?

Thanks!

Answer 1

No not at all! I think you may have gone to a dodgy jeweller store! The ring shank is cut, a piece of metal is removed and then the ring shank is soldered back together. It's all done with heat. Afterwards, the ring is polished to remove the fire scale. Whoever told you that you would have to get a new ring is just trying to get more money out of you! Ask around for a trustworthy jeweller and go there!



Hope this helps x

Answer 2

No, resizing doesn't mean you will be getting a new ring. You are getting the exact same ring. To resize a ring they heat it up really hot so they can easily bend the metal to the size they need it. They then let it cool off so it doesn't bend anymore. If the ring has diamonds down the side and you are wanting the ring to be resized to a very small size then that could be the reason they are discouraging you from resizing it. When diamonds are involved they can easily chip, break, or come loose if you resize it too small so it ends up being more trouble than its worth.

Answer 3

A ring can only be resized so much. The jeweler was trying to communicate to you that the ring would be damaged from resizing, so you would be best to replace it. Sometimes this is how it has to be done if the ring is more than a couple sizes off or is an intricate design.

Answer 4

I had mine resized four occasions! The retailer my finace purchased it from got here with a plan without spending a dime resizing for lifestyles. I had rough to suit hands, and it took a couple of attempts to get it proper. My knuckle is higher than my finger, and with a solitaire diamond, I simply had disorders retaining the hoop upright in view that it was once so best heavy. We ended up going with a bit smaller than my knuckle with a pair beads further within to keep the hoop instantly. So my ring is a 6, however suits like a five a million/two-five three/four with the beads. As we age and acquire/shed weight or season difference, earrings want resized. I could simply get it sized to suit now, and feature it resized later when you discover you want the hoop to be smaller. It could be a disgrace not to put on your lovely ring on the grounds that you'll be wasting weight.

Answer 5

Normally no.



Could they have meant the ring won't be the same after resizing? Resizing a plain gold band is easy...but if there are patterns on the band it might not be possible.

Answer 6

You have two options:



- the band is cut, and metal is removed from the band. It's then squeezed back together, and re-soldered into a complete band.



- the band is cut, and metal is added to the band, then soldered into place, making the band larger.



Sometimes, because of the design or setting, or metal composition of the band, re-sizing isn't possible. Take the ring to another jeweler, and ask about re-sizing. If they say it's not a problem, you know the first jeweler is a little shady. If they say it's not possible, ask for specific reasons why, and take note of them.

Answer 7

I don't know the techniques but I always thought the ring was cut down to fit your finger as in a tiny piece of the metal was cut out then sautered back in such a way that you can't tell